Trojan Gold 2412
Exhaust ventilation port -
Intake ventilations -
Air Cooled ventilation ports -
High level cable entry ports for lighting, fans and pumps.
400W x2 = Low power use in high temp environments or vegetative stages
600W x 2 = standard light recommendation
1000W x 2 = Enhanced light recommendation
600W x 3 = Enhanced light recommendation
Ventilation 400W x 2 lights = 5" RVK A1/VK (winter) -
600W x 2 lights = 6" RVK A1/VK (winter) -
1000W x 2 lights = 6" RVK A1/VK (winter) -
600W x 3 Lights = 6" RVK L1/VK (winter) -
The use of air cooled lights will reduce the exhaust ventilation requirements, but will require a separate fan for the reflectors.
We recommend the use of a thermostatically controlled fan speed controller to maintain your temperatures within the desired range.
Intake fans -
This is to allow for the restrictions caused by carbon filters and to ensure negative pressure, when correctly set up your Trojan tent should be sucking in slightly. When using intake fans always have a passive intake (ducting without a fan) this will ensure that the tent can breathe and that you aren't causing too much restriction on the intake.
Winter use in when incoming air is at or close to 0 degrees Celsius and summer use is 20 deg plus. Please note if the incoming air is close to or above your desired growing temperature then any amount of ventilation will struggle to cope and we recommend reducing light wattage or the use of air conditioners in these environments.